Preparations Before Use; Connecting To Your Smartphone - Tanita RD-953 Instruction Manual

en

Preparations before Use

Inserting the Batteries
Note:
・Be sure that the batteries are inserted in the correct orientation. If the batteries are
inserted incorrectly, fluid may leak from the batteries and damage the floor.
・If you do not intend to use this unit for a long period of time, remove the batteries
before storage.
・The included batteries from factory may have decreased energy levels over time.
Set your location code
Di erent locations across the world have di erent gravitational
pulls. These di erences a ect the accuracy of the weight
measurement. You can obtain the most accurate weight readings by
selecting the correct gravity setting on the scale according to your
geographical location.
1.When the power is o , press and hold the button.
2.Refer to the map enclosed, and press the buttons to select
your location code.
3.Press the button to enter and save the setting.
Changing the Weighing Unit
Note: Only for use with models that have the unit switching button.
The weighing unit can be changed using the switch on the back of the monitor.
Press the button when the display is blank. When "0.00kg" (or "0.0lb", "0.0stlb") appears on the display, press the Unit Switching
button underside of the monitor to switch the weighing unit.
Note: If weighing unit is set to pounds or stone-pounds, the height programming mode is automatically set to feet and inches.
Similarly, if kilograms is selected, height is automatically set to centimeters.
6

Connecting to Your Smartphone

1.
2.
Up Button
SET Button
3.
Down Button
O Button
4.
5.
6.
Turn the Bluetooth setting on, and use the URL to download the My Tanita app.
www.tanita.eu
Note:
・See the Tanita website for details on supported models.
・If you do not wish to use the dedicated app, configure the settings manually
on the body composition monitor. (P.8)
・・You need to register your smartphone again if you replace your smartphone.
Launch the app.
Set up to pair your Tanita device (RD-901 / RD-953 / AM-161)
Select which device you want to pair with.
Pair / synchronise
Note:
• The approximate communication distance is 5m in an unobstructed location.
Follow the instructions on the app, and press and hold the
on the Body Composition Monitor for 3 seconds.
Note:
• When registering your body composition, place the Body Composition Monitor on a hard,
flat floor and step on it with bare feet.
Follow the instructions on the app and measure your body composition.
When measurement is complete, the connection to the smartphone is disconnected.
The screen displays and instructions may di er depending on the app specifications.
en
(communication) button
7