Vivid Audio GIYA Owner's Manual page 11

For many folks the use of extra wires will seem quite pointless in which case a single pair of
good quality conductors will be all you require and the two pairs of terminals must be linked at
the speaker using the links provided. In the accessories pack you will find two 10cm lengths
each of red and black wire each terminated with a 4mm plug and spade. Link the hi-mid
section to the low section as shown in Fig.3. supplied non bi-wired links.
Fig 4. this arrangement will allow you to use amplifier leads terminated with either spade
connectors (as shown) or 4mm plugs.
ImPORTANT NOTE: Figures 2, 3 and 4 are views of the Giya terminal tray as seen from below!
Therefore the hf/mf terminals are shown on the left in these images.
Fig 3
Fig 4
ChAPter 2 9