Dryer Features - GE DDSS475 Owner's Manual

About the dryer features.
(appearance may vary)
Dryness
Sensor Cycle
Color Logic
Select the correct FABRIC CARE setting.
Match the particular color below the words
with the same color on the Cycle Dial.
Example: Drying a load of clothing labeled
permanent press.
Wrinkle Care
When an automatic drying cycle is
complete, the dryer will automatically
advance into Wrinkle Care . This provides
approximately 40 minutes of no-heat
tumbling after the clothes are dry. The
clothes can be removed at any time during
Wrinkle Care .
End of Cycle Signal
If a volume level is selected, the signal will
sound when the cycle is done. The signal
will stop when the door is opened, or when
the Cycle Selector knob is advanced to an
OFF position.
Dryness Sensor Cycle
(on some models)
This feature is only activated in the
COTTONS , EASY CARE and DELICATES cycles.
The Dryness Sensor provides greater
drying accuracy than standard machines,
resulting in shorter dry times and better
clothes care. As the clothes tumble, they
touch a moisture sensor. The sensor will
stop the heating cycle as soon as the
clothes have reached the selected dryness.
www.GEAppliances.com
Choose the FABRIC CARE setting-—for
1
this load it would be the EASY CARE
MED. HEAT (which is a particular color).
Turn the Cycle Dial to the area that
2
has the same color as the FABRIC CARE
setting you have chosen—for this load it
would be EASY CARE.
NOTE:
Remove garments promptly at the sound
of the signal. Place clothes on hangers
so wrinkles won't set in.
Use the END OF CYCLE SIGNAL especially
when drying fabrics like polyester knits
and permanent press. These fabrics should
be removed so wrinkles won't set in.
7