Table of Contents
Advertisement
Installation
Basic Operation
1 Insert a HDD (IDE) for Video Storage
The HDD should be set as MASTER.
(Normally the default setting of HDD is Master)
Note
After hard disk case is inserted into the hard
disk tray, be sure to turn the tray key in lock
position. Otherwise, hard disk will not be
detected and The System Loading procedure
can not be completed.
2 Connect cable for video/audio input and
video/audio out
The POWER LED lights if power is normal.
ZR-DH111NP
3 Switch Power On
The detail connection is described in SYSTEM
CONNECTION.
4 Press MENU key to enter SET UP MENU.
Once inside the main menu you will find there are
nine set up pages as below:
1. CLOCK/LANGUAGE SETTING MENU
2. TIMER-SET 1 SETTING MENU
3. TIMER-SET 2 SETTING MENU
4. NORMAL RECORD SETTING MENU
5. ALARM RECORD SETTING MENU
6. BUZZER SETTING MENU
7. ARCHIVE SETTING MENU
8. NETWORK SETTING MENU
9. SYSTEM SETTING MENU
5 Turn the shutter dial clockwise or
counterclockwise to change set up page.
Installation
7
Advertisement
Table of Contents
