Normal Record Setting Menu - Ganz ZR-DH111NP Instruction Manual

1 channel digital recorder
Table of Contents

Advertisement

Programming

NORMAL RECORD SETTING MENU

1 SPEED
Recording Speed
User can select the recording speed from
2/3 (NTSC/PAL) HR to 960 HR.
2 QUALITY
Picture Quality
There are six quality levels for recording
LOWER
:
15 KB
LOW
:
20 KB
BASIC
:
25 KB
STANDARD
:
30 KB
HIGH
:
35 KB
SUPERIOR
:
40 KB
3 MULTIPLEXER
ON/OFF
User can select Multiplexer connection or One
Camera connection
ON
The video input from MUX MAIN MONITOR con-
nector at the rear panel will be looped through to
the main monitor out when the recorder is not in
MENU mode.
OFF
The main monitor output is same as video out
connector all the time.
4 RECORD MODE
There are two record modes for Time lapse re-
cording. FIELD or FRAME
5 Disk Full
STOP
14
NORMAL RECORD SETTING MENU
SPEED
QUALITY
MULTIPLEXER
RECORD MODE
DISK FULL
When disk is full, the machine will STOP record-
ing.
REWRITE
When disk is full, the current video will OVER-
WRITE the existing video from the beginning of
HDD.
UP
: Press LEFT or RIGHT to move
the cursor to the left or right.
LEFT
RIGHT
: Press UP or DOWN or Jog Dial
to change the value.
DOWN
:002
: STANDARD
:OFF
: FIELD
:STOP
ZR-DH111NP

Advertisement

Table of Contents
loading

Table of Contents