Toro 23210 Operator's Manual page 13

• To turn right, rotate the traction control clockwise
(Figure 10).
• To turn left, rotate the traction control
counterclockwise (Figure 11).
• To stop, release the traction control (Figure 7).
Note: The farther you move the traction control in
any direction, the faster the machine will move in that
direction.
Grinder Control Lever
Operate the grinder using the grinder control lever as
follows:
• To start the grinder (Figure 12), press the red button
on the top of the lever, then squeeze the trigger.
Once the grinder has started, you can release the
red button.
• To stop the grinder (Figure 12), release the trigger
for more than a half second.
Figure 9
G008131
Figure 10
G008132
Figure 11
Note: If you are operating the grinder an
momentarily release the trigger (i.e., less than a half
second) the grinder will continue operation.
1. Neutral
2. Start the grinder
• To raise the grinder, pull back on the lever
(Figure 13).
13
Figure 12
3. Run the grinder
4. Stop the grinder