Disassemble and assemble
The unit comprises mechanical and electric part
including:front panel, base panel, top panel,
back panel and loader, AV output board,decoder,etc.
Take out disc from trouble player
If you can not take out disc even press OPEN/CLOSE
key,please pull power cord from the socket and follow
as below:1. Wring 8 screws out then pull left and
right side to take away top panel that rear part is
upper(illustrated
A)
Graph A Dispart cabinet
2.Wring 6 screws out connected base panel with bottom
board then wrest 4 screws connected loader with bottom
board (illustrated B)
Graph B Dispart front panel and loader
3.Take out front panel and loader carefully, there is one
white plastic gear under the loader.Rotate the gear as
illustrated C to stretch DVD tray and door (illustrated D),
you may take disc out carefully.
Gear
Graph C Rotate white gear
PCB position
All PCB assemblies locate as illustrated H
card reader board
front control board
Graph H PCB boards location
11
Graph D Take out disc
AV output board
decoder board
Volume zeta board