Adjusting The Height-Of-Cut Setting; Stopping The Motor - Toro 21136 Operator's Manual

Figure 10
5. Hold the control bar to the handle and release the
button (Figure 11).
g015055

Stopping the Motor

1. Release the control bar
g015056
Figure 12
2. Disconnect the machine from the power source
whenever you leave the machine unattended.
g015054
Figure 11
(Figure 12).
Adjusting the Height-of-Cut
Setting
DANGER
Adjusting the height-of-cut setting could bring your
hands and feet into contact with a moving blade
and result in serious injury.
Stop the motor and wait for all moving parts to stop
before adjusting the height-of-cut setting.
1. Stop the motor and wait for all moving parts to stop.
2. Pull the height-of-cut lever out of its position slot, and
move it forward or rearward, and allow it to go into
the desired slot (Figure
7
13).
g015057
Figure 13