Setup
Important: Do not connect the machine to a power
source until the machine is fully assembled.
1
Unfolding the Handle
No Parts Required
Procedure
1. Cut the cable tie around the handle and remove the
cable tie and the packaging material (Model 21136
only).
2. Carefully unfold the handle, keeping the cables clear of
the pivot points so that they do not get pinched.
CAUTION
The handles pass each other like a scissors
while folding and unfolding them and can
pinch your fingers.
Keep your fingers clear of the pivot points and
crossing handles as you fold or unfold the
handle.
g015048
Model 21136
Figure 1
3. Tighten the knobs on the handle to secure it in place.
2
Assembling the Grass Bag
No Parts Required
Procedure
1. Slide the wire bag frame into the grass bag, ensuring
that the handle is above the fabric
1
2
g015049
1. Grass bag
2. Wire frame
4
Figure 2
Model 21141
(Figure
3).
Figure 3
3. Handle
g015106
3