Table Of Contents; Introduction - Toro 30722 Operator's Manual

This product complies with all relevant European directives,
for details please see the separate product specific Declaration
of Conformity (DOC) sheet.

Introduction

This rotary-blade lawn cutting deck is mounted to a ride-on
machine and is intended to be used by professional, hired
operators in commercial applications. It is primarily designed
for cutting grass on well-maintained lawns in parks, sports
fields, and on commercial grounds. It is not designed for
cutting brush, mowing grass and other growth alongside
highways, or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers
of your product ready. The model and serial numbers are
stamped into a plate that is mounted on the rear of the mower
deck (just ahead of the left rear castor wheel). Write the
numbers in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 1),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
© 2013-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Contents
Introduction .................................................................. 2
Safety ........................................................................... 3
Safe Operating Practices........................................... 3
Toro Mower Safety .................................................. 4
Safety and Instructional Decals ................................. 5
Setup ............................................................................ 7
1 Installing the Castor Wheel Assemblies .................... 8
2 Lowering the Grass Deflector ................................. 8
3 Installing the Ball Joints and Connecting the Lift
Cylinder.............................................................. 8
4 Installing the Drive Shaft to the Traction
Unit ................................................................... 9
5 Connecting the Right-Hand Push Arm to the
Cutting Unit.......................................................10
6 Connecting the Left-Hand Push Arm to the
Cutting Unit.......................................................10
7 Connecting the Drive Shaft to the Cutting Unit
Gear Box ...........................................................11
8 Installing the Lift Chains .......................................12
9 Greasing the Machine ...........................................12
10 Installing Rear Weight .........................................12
Product Overview .........................................................13
Specifications ........................................................13
Attachments/Accessories........................................13
Operation ....................................................................13
Checking the Lubricant in the Gear Box.....................13
Adjusting the Height-of-Cut ....................................14
Adjusting the Rollers...............................................14
Using the Grass Deflector .......................................15
Operating Tips ......................................................15
Maintenance .................................................................16
Recommended Maintenance Schedule(s) ......................16
Lubrication............................................................17
Separating the Cutting Unit from the Traction
Unit ..................................................................17
Mounting the Cutting Unit to the Traction
Unit ..................................................................19
Replacing the Blade Drive Belts ................................19
Servicing the Bushings in the Castor Arms .................19
Servicing the Castor Wheels and Bearings ..................20
Removing and Installing the Blade(s).........................20
Inspecting and Sharpening the Blade(s)......................21
Checking and Correcting Mismatch of
Blades ...............................................................22
Troubleshooting ...........................................................23
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved