Attachment Lift Lever; Attachment Power Lift - Toro 78280 Operator's Manual

Operation

Attachment Lift Lever

The attachment lift lever (Fig. 19) is used to raise and
lower various attachments.
Raising Attachments
1. Depress the brake pedal to stop the machine.
2. Pull attachment lift lever rearward until latch
locks. In this position the lift will hold the
attachment in the up, or raised position.
Lowering Attachments
1. Depress the brake and/or clutch pedal(s) to stop
the machine.
2. Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release
the latch. Move lift lever forward to lower
attachment.
2
1
Figure 19
1. Lift lever
2. Button
3. Dial-A-Height
14
3
5
4
6
1205
4. Indicator
5. High
6. Mounting position

Attachment Power Lift

The attachment power lift (optional on some models)
(Fig. 20) is used to raise and lower attachments.
Raising Attachments
1. Turn key to the "ON" or "RUN" position
(Fig. 20).
2. Push the lift switch in the "UP" direction to raise
the attachment lift (Fig. 20). This will lift and
hold the attachment in the up, or raised position.
Lowering Attachments
1. Turn key to the "ON" or "RUN" position
(Fig. 20).
2. Push the lift switch in the "DOWN" direction to
lower the attachment lift (Fig. 20). This will
lower the attachment lift.
2
3
Figure 20
1. Key
2. Lift switch UP
1
2266
3. Lift switch DOWN