Asus Z97-E/USB3.1 User Manual page 61

Power Current Slope [Auto]
This item allows you to enhance the power saving condition or the system overclocking
capabiltity. Select a higher power current slope levels for power saving enhancement
or lower power current slope levels for system overclocking enhancement.
Configuration options: [Auto] [LEVEL ‑4] ‑ [LEVEL 4]
Power Current Offset [Auto]
This item allows you to increase or decrease the output current sensed by the CPU. It
finds the balance between optimal regulating while staying below the current threshold.
Configuration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%]
[12.5%] [0%] [‑12.5%] [‑25.0%] [‑37.5%] [‑50.0%] [‑62.5%] [‑75.0%] [‑87.5%] [‑100%]
Power Fast Ramp Response [Auto]
This item allows you to enhance the response of the CPU voltage regulator during the
load transients. Use the <+> or <‑> to adjust the value. The values range from 0.00 to
1.50. Configuration options: [Auto] [0.00] ‑ [1.50]
CPU Internal Power Saving Control
Power Saving Level 1 Threshhold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power‑saving condition.Use <+> or <‑> key to
adjust the value. The values range from 0 A to 80 A at 1 A increment.
Power Saving Level 2 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power‑saving condition.Use <+> or <‑> key to
adjust the value. The values range from 0 A to 50 A at 1 A increment.
Power Saving Level 3 Threshold [Auto]
Lower value provides sufficient overclocking tolerance to enlarge the overclocking
potential. Higher value provides better power‑saving condition.Use <+> or <‑> key to
adjust the value. The values range from 0 A to 30 A at 1A increment.
2.5.16 Extreme Over-voltage [Disabled]
This item allows you to set higher voltages for overclocking. When you enable this item,
you can choose a high level voltage to overclock, but does not guarantee the CPU life.
Configuration options: [Disabled] [Enabled]
2.5.17 CPU Core Voltage [Auto]
This item allows you to configure the amount of voltage fed to the CPU cores. Increase the
voltage when setting a high Core Frequency value. Configuration options: [Auto] [Manual
Mode] [Offset Mode] [Adaptive Mode]
• The following item appears only when you set the CPU Core Voltage to [Manual
Mode].
• [Adaptive Mode] is available for some specific CPU types.
CPU Core Voltage Override [Auto]
Allows you to set the CPU Core Voltage override. Use the <+> or <‑> keys to adjust the
value. The values range from 0.001V to 1.920V with a 0.001V interval.
ASUS Z97-E/USB 3.1 2-25