Hand/Arm Vibration; Safety And Instructional Decals - Toro 20897 Operator's Manual

Hand/Arm Vibration

Measured vibration level for right hand = 5.0 m/s
Measured vibration level for left hand = 5.2 m/s
Uncertainty Value (K) = 2.1 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.

Safety and Instructional Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Engine switch Off
2. Engine switch On
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
2. Cutting/dismemberment of hand or foot—stay away from
moving parts.
2
2
2
110-9457
3. Unlocked
4. Locked
112-8760
CAUTION
Long-term exposure to vibration while operating
the machine may cause some numbness in the
hands and wrists.
Wear gloves that dampen the vibration whenever
you operate the machine for an extended period of
time.
1. Warning—read the
Operator's Manual.
2. Thrown object
hazard—keep bystanders
a safe distance from the
machine.
3. Thrown object hazard—do
not operate the mower
without the rear discharge
plug or bag in place; do
not operate the mower
without the side discharge
cover or deflector in place.
1. To engage the blade, press the button.
2. Pull back the bail to the handle.
4
114-2820
4. Cutting/dismemberment
hazard of hand or foot,
mower blade—stay away
from moving parts.
5. Cutting/dismemberment
hazard of hand or foot,
mower blade—remove
the ignition key and read
the instructions before
servicing or performing
maintenance.
6. Cutting/dismemberment
hazard of hand or foot,
mower blade—do not
operate up and down
slopes; operate side to
side on slopes; stop the
engine before leaving the
operating position; and
look behind you when
backing up.
119-3796