Trol - BMW F 800 GS Adventure Rider's Manual

Step 2:
This step is not assigned any
function.
Press button 1 or button 2.
Step 3: Which alarm tone is to
be selected?
Rising and falling:
Press button 1.
intermittent:
Press button 2.
Step 4: Is the alarm function
to be automatically activated
after the ignition is switched
off?
yes:
Press button 1.
no:
Press button 2.
When is the programming
canceled?
Programming is canceled
by switching off the ignition
before the last programming
step.
or automatically if more than
30 seconds pass between two
programming steps.
The data are not saved when
programming is canceled.
Save programming
Programming is saved
by switching off the ignition
after the last programming step
or automatically 30 seconds
after the last programming step
The DWA indicator light stops
flashing and acknowledgment
tones sound.
Logging on remote
control
with anti-theft alarm system
OE
(DWA)
When is it necessary to
log on a remote control?
Should you log on an additional
remote control or want to replace
a lost remote control, then you
must always log on all remote
controls with the DWA. You can
log on a maximum of four remote
controls.
5
59
z