Figure 3. Connectors And Jumper Block - Seagate Medalist 1640 Product Manual

Medalist 1640 and 2140 Product Manual, January 1996 19
• Configure the drive for cable select.
• Install a remote LED.
The jumper settings for these options are shown in Figure 4 on page 20.
A spare shunt is attached to pins 2 and 4. This pin combination does not
affect any drive function. If you need additional shunts, use Seagate part
number 10562-001 or an equivalent.

Figure 3. Connectors and jumper block