Page 26
The cleaning cartridge contains a highly fl ammable liquid so keep it away from sources of ignition. Do not smoke near the station. Do not expose to direct sunlight for long periods of time. Do not refi ll the cartridge and use only original Braun refi ll car- tridges.
Page 27
Description Clean&Renew station Cleaning fl uid display Lift button for cartridge exchange Station-to-shaver contacts Start button Fast clean button Cleaning program indicators Station power socket Cleaning cartridge Shaver Foil & Cutter cassette Cassette release button Shaver head lock switch Pop-out long hair trimmer On/off...
Page 28
Charging and cleaning the shaver Insert the shaver head down into the cleaning station. The contacts on the back of the shaver will align with the contacts in the cleaning station. Important: The shaver needs to be dry and free from any foam or soap residue! If required, the Clean&Renew station will auto- matically charge the shaver.
Shaver display The shaver display shows the charge status of the battery. During charging or when using the shaver, the respective green charge status will blink. When the battery is fully charged the green charge status will light up continously, provided the shaver is switched on or connected to an electrical outlet.
Page 30
Tips for the perfect dry shave For best shaving results, Braun recommends you follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90°) to your skin. 3. Stretch your skin and shave against the direction of your beard growth.
Page 31
Manual cleaning Rinsing the shaver head under running water is an alternative way to keep the shaver clean, especially when travelling: • Switch the shaver on (cordless) and rinse the shaver head under hot running water until all residues have been removed. You may use liquid soap without abrasive substances.
While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time. Accessories Available at your dealer or Braun Service Centres: 70S/70B • Foil & Cutter cassette 70S/70B •...
Trouble-Shooting Problem: Possible reason: Remedy: SHAVER Unpleasant 1. Shaver head is 1. When cleaning the shaver head smell from the cleaned with water. with water only use hot water shaver head. 2. Cleaning cartridge is and from time to time some in use for more than liquid soap (without abrasive 8 weeks.
Page 34
CLEAN&RENEW STATION Shaving system 1. Drain of the 1. Clean the drain with a wooden is still wet Clean&Renew station toothpick. Regularly wipe the after cleaning is clogged. tub clean. program 2. Cleaning cartridge 2. The ethanol proportion has has been has been used for decreased while the oil completed.
Need help?
Do you have a question about the 5693 and is the answer not in the manual?
Questions and answers