Makita DDF459 Instruction Manual
Hide thumbs
Also See for DDF459:
- Instruction manual (57 pages) ,
- Instruction manual (54 pages) ,
- Instruction manual (49 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Makita DDF459
Summary of Contents for Makita DDF459
- Page 1 INSTRUCTION MANUAL Cordless Driver Drill DDF459 012969 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DDF459 Steel 13 mm Wood 38 mm Capacities Wood screw 6 mm x 75 mm Machine screw High (2) 0 - 1,500 No load speed (min Low (1) 0 - 400 Overall length 179 mm Rated voltage D.C. - Page 3 When operating a power tool outdoors, use an 20. Store idle power tools out of the reach of extension cord suitable for outdoor use. Use of children and do not allow persons unfamiliar a cord suitable for outdoor use reduces the risk of with the power tool or these instructions to electric shock.
-
Page 4: Cordless Driver Drill Safety Warnings
GEB088-1 If electrolyte gets into your eyes, rinse them out with clear water and seek medical CORDLESS DRIVER DRILL attention right away. It may result in loss of SAFETY WARNINGS your eyesight. Do not short the battery cartridge: Use auxiliary handle(s), if supplied with the Do not touch the terminals with any tool. -
Page 5: Functional Description
Overloaded: • FUNCTIONAL DESCRIPTION The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, release the switch trigger on CAUTION: the tool and stop the application that caused Always be sure that the tool is switched off and the •... -
Page 6: Speed Change
Lighting up the lamp Speed change 1. Speed change 1. Lamp lever 012975 012972 CAUTION: CAUTION: Always set the speed change lever fully to the Do not look in the light or see the source of light • • correct position. If you operate the tool with the directly. -
Page 7: Operation
ASSEMBLY OPERATION CAUTION: CAUTION: Always be sure that the tool is switched off and the Always insert the battery cartridge all the way until it • • battery cartridge is removed before carrying out locks in place. If you can see the red part on the any work on the tool. -
Page 8: Optional Accessories
If you need any assistance for more details regarding There is a tremendous force exerted on the tool/bit • these accessories, ask your local Makita Service Center. at the time of hole break through. Hold the tool Drill bits •... - Page 12 Makita Corporation www.makita.com 885237A8...