Samsung hw-h500 User Manual page 21

Using the AUTO POWER LINK function
If you connect the main unit to a TV with a digital optical cable, set the
Auto Power function ON to have the Soundbar turn on automatica@' when
you turn the TV on_
Press the AUTO POWER button on the Soundbar remote to turn the
AUTO POWER function on and off
• The Auto power function turns on and off each time you pressAUTO
POWER°
AUTO POWERLINK DisplaY
ON POWERLIN_"ON
OFF POWERUN_"OFF
'_ This function is availableonly when Anynet+ (HDMDCEC) is
turned off
Using the AUDIO SYNC function
\4@0 may appear out of synch with the audio if the Soundbar is
connected to a digitan T\i_If this occurs, adjust the audio delay time to
match the video_
PressAUDIO SYNC +/° on the remote control of this unit
. You can use the +, - buttons to set the audio delay time between 0
ms and 300 ms
'_ In USB mode, TV mode, or BT mode, the Audio Sync function
Using the TONE function
PressTONE on the Soundbar remote
. Each time the button is pressed, the selection changes as follows :
TREBLE '_ BASE Press the VOL + or VOL - button to increase or'
decrease the Treble or Bass votume_ You can set the 1-onesetting
for each from -3 to +3_
SPEAKER button
If the TV and Soundbar are connected via HDMI, this button !ets you
select between iistening to audio through your TV or through the
Soundbar_
Press SPEAKERon the remote control of this unit
AUD 0 1 1 , :
MODE SPEAKER Scro DIspay DIsp ay
_J TV SPEAk'ER TV SP_"
NDMI IN
Soundbar ,_TRSPEAKER HDMI
_J TV SPEAKER S MUTE
ARC
Soundbar ,_iR SPEAKER TV ARC
21