Samsung hw-h500 User Manual page 18

USB
nctions
Once the pairing is established, when you change the Soundbar to the TV mode from other input modes, it
will automatica Jyconnect to the TV_
• The Soundbar will pay the TV's audio when it is connected to the TV_
• Changing the Soundbar from TV mode to any other mode wil cance the SoundConnect connection_
• If you want to cance the existing pairing of the Soundbar to a TV and pair your Soundbar to a different TV:
o Press the PLAY/PAUSE button on the Soundbar for 5 seconds in the TV input mode to cance the existing
pairing_ You can now pair it to a different TV_
• In the SoundConnect mode, you can contro the voume and mute using either the TV remote or the Soundbar
remote_
TV SoundConnect operation range
recommended pairing range: within 20 inches (within 50cm)
recommended operation range: within 1625 fL (Sm)
Bfthe distance between the Soundbar and Samsung TV is over i 625 ft. (Sin), the connection or the
sound can be cut off. Bfthis occurs, connect to the Samsung TV again within the operational range_
Make sure the Samsung TV's SoundConnect mode is on before you use this function_
The PLAY, NEXT, PREV, STOP buttons will not work in the SoundConnect mode_
Bluetooth Power On function
o The Soundbar will be powered on automatica y when you turn the TV on if you connected the TV and
Soundbar with the SoundConnect function_
o You can togge this function On/Off by pressing and ho ding the SOURCE button on the Soundbar
remote for more than 5 seconds when the Soundbar is powered of L If set to Off, the product turns off
automatica Jywhen the TV turns off, but it does not turn on automatica y_
o This feature is supported by TVs re eased beginning in 2013_
'_' The SoundConnect feature is supported by select models released from 2012 on_ Check whether your TV
supports SoundConnect (SoundShare) before you begin_ (For more information, refer to the user's guide of your
TV,)
!_ Connect a USB device to the USB port on the side of the unit_
2_ Pressthe (1=,)button on the front pane of the Soundbar repeated y unti USB appears_
3_ USB appears on the display screen and then disappears_
• The Wire ess Audio o Soundbar connection is comp ete_
Before you connect a USB device
Be aware of the following:
• If the file name of a folder on a USB device exceeds i 0 characters,
it is not shown on the Soundbar's display.
• This product may not be compatible with certain types of USB
storage media_
• The Soundbar supports the FAT16 and FAT32 file systems_
o The NTFS file system is not supported_
18