Table of Contents
Advertisement
UPGRADE FIRMWARE-2
Using for Window tool
1
Writing the firmware as below.
1. Prepare three data on a hard disk of the personal computer.
Loader file
2. Start the UFU.exe file.
Double click the UFU.exe.
3. Select "Easy" mode.
4. Select "File Selection" mode.
5. Select a program file and open the file.
dvdfw_ sp501
b2bk1076.sz0
UFU witting file
UFU setting file
6. Connect the JIG (0J13), FFC and
connection cable (RS-232C straight type).
7. Turn the power switch and standby "ON" of the DV-SP501.
No disc condition.
8. Press the start key.
9. Wait for about 10 minutes.
10. Complete the upgrade firmware.
Next step.
Please continue work ID number and ID data set up.
DV-SP501
Advertisement
Table of Contents
