Table of Contents
Advertisement
PSTN telephone line (normal analog line
If you have a
connect the router as shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to
any of the 4 WLAN ADSL2+ Router's LAN Ports.
2. Connect the supplied RJ11 telephone cable from your home's telephone
jack to the "LINE" port of the supplied splitter. Connect the other supplied
RJ11 telephone cable to the "DSL" port of the splitter and connect the other
end of this cable to the "LINE" port of your WLAN ADSL2+ Router.
3. Connect a RJ11 telephone cable to the "PHONE" port of the splitter and
connect the other end to your telephone.
4 Connect the power adapter to the power inlet (PWR) of the WLAN ADSL2+
Router and turn the power switch (SW) of your WLAN ADSL2+ Router on.
Wireless ADSL2+ Router
4
TW263R4
)
Advertisement
Table of Contents
