Table of Contents
Advertisement
Wireless ADSL2+ Router
Installation & Setup
Follow each STEP carefully and only go to the next step
once you have complete the previous STEP.
STEP 1
Connection of WLAN ADSL2+ Router
ISDN telephone line
If you have an
shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to
any of the 4 WLAN ADSL2+ Router's LAN Ports.
2. Connect the supplied RJ11 telephone cable from your home's telephone
jack to the "LINE" port of the supplied splitter. Connect another RJ11
telephone cable to the "MODEM" port of the splitter and connect the other
end of this cable to the LINE port of your WLAN ADSL2+ Router.
3. Connect a RJ11 telephone cable to the "PHONE" port of the splitter and
connect the other end to your telephone.
4 Connect the power adapter to the power inlet (PWR) of the WLAN ADSL2+
Router and turn the power switch (SW) of your WLAN ADSL2+ Router on.
connect the modem router as
3
Advertisement
Table of Contents
