Table of Contents
Advertisement
6.4 L
OADING FILTER SETS
The Export tab initially shows four empty "slots" for filter sets (a filter set is one filter for the left channel and
one filter for the right channel). Filter sets are managed with a "drag and drop" metaphor:
To load the most recently generated filter set into the processor, drag the box at the top left (labeled "More
Bass" in the example) and drop it onto an empty slot.
To remove a filter set, click on its name (oriented vertically), drag it from the slot and drop it on the trashcan
icon at the top right.
To load a filter set into a slot that already has filters loaded, first delete the loaded filter set by dragging it
onto the trashcan icon. Then drag and drop the current filter set onto the now-empty slot.
The name displayed on the filter slot after dragging and dropping is the name of the project. This example
screenshot shows two slots loaded:
The two additional controls on this tab are:
Filter
Turn this on to enable the Dirac Live® correction filters. This function can be programmed into a
remote control.
Output volume
Adjust the slider to adjust the output volume of the processor. Once the computer is disconnected, output
volume can also be adjusted with a remote control.
Once a set of filters is loaded, they can be selected with a remote control. If a slot with no filters loaded is
selected, Dirac Live simply plays through the signal without alteration.
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
41
Advertisement
Table of Contents
