Attaching The Steering Wheel - Toro 70185 Setup Instructions

3

Attaching the Steering Wheel

Parts needed for this procedure:
1 Socket pin
Procedure
1. Rotate the steering wheel upward until it is aligned
with the steering column.
2. Secure the steering wheel with the socket pin
(Figure 3).
1. Socket pin
Figure 3
4
Installing the Engine Cover
Parts needed for this procedure:
1 Engine cover
2 Screws, M6 x 25 mm
Procedure
1. Slide the tabs on the engine cover into the slots on
the body of the tractor (Figure 4).
1. Engine cover
2. Secure the cover with 2 screws (M6 x 25 mm)
(Figure 4).
3
Figure 4
2. Screw