Panasonic KX-TG7322AL Quick Manual page 7

Frequently asked questions
Question
DSL/ADSL Issues (Noise on line)
Why am I getting noise on
my telephone line?
Caller ID
What should I do to display
caller information?
Registration (Adding new handset)
How can I register a handset
to the base unit?
Which handsets can I buy to
use with this model?
Cause & solution
L If you subscribe to DSL/ADSL service, we
recommend you to attach a DSL/ADSL filter to the
telephone line between the base unit and the
telephone line socket. Contact your DSL/ADSL
service provider or purchase a DSL/ADSL filter
from a retailer or store. Refer to troubleshooting
section for further details.
L If you do not subscribe to DSL/ADSL service,
there may be an enviromental issue that is
causing the interference (noise). Move closer to
the base unit and check whether there is noise. If
there is no noise, some enviromental interference
has caused the noise.
L If there is noise intermittently, there is a possibility
of enviromental interference. Refer to the
troubleshooting.
L You must subscribe to a Caller ID service. Contact
your service provider/telephone company for
details.
L Make sure that you follow registration procedure
in "Registering a handset to the base unit" on
page 8:
– you are using the supplied handset that came
with the kit (KX-TG7301, KX-TG7321 and
KX-TG7322).
– the AC adaptor is connected to the base unit.
– the handset is charged and not placed on the
base unit.
– note the location of {x} (Locator) button on the
base unit as this is used to start registration
process and is required to be pressed and held
for about 5 seconds until the registration tone is
heard (KX-TG7321 and KX-TG7322).
L The optional handset is KX-TGA731AZ.
– 7 –