Sound Recording; Deleting Video Footage; Setting Date/Time - Oregon Scientific ATC-2K User Manual

Sound Recording

When the sound icon is flashing, "ON" will be shown on screen.
"ON" means recording sound during filming. Press the 'Movie
shutter button' (one beeping sound) to switch to "OFF", which
means no recording sound. After "OFF", it will loop back
to "ON" after pressing 'Movie shutter button' again. Press the Enter
button (two beeping sounds) to confirm the setting and to go to the
next function icon.

Deleting video footage

To delete the last video footage that was recorded, press the Menu button
until the Status LCD displays
Repeat these two steps to individually delete your files.
Note: After file deletion, the LCD display will adjust the remaining number
of files accordingly.
19
. Press the Enter button to confirm.
Delete All Video Footage
To delete all video footage stored in your camera, press the Menu button
until the LCD displays . Press the Enter button to confirm.
Note: It may take a few minutes to delete multiple files at one time.
Setting Date/Time (Clock Set)
Shift to the Date icon in the Menu mode by pressing the Menu button
repeatedly. When the Date icon is flashing, press the Enter button to change
the date and time.
Setting the Year
1. Press the 'Movie shutter button' to adjust the last digit of the
year (2000-2009). Press the Enter button to confirm the last
digit.
2. Press the 'Movie shutter button' to adjust the 3rd digit of the year (201X-
209X). Press the Enter button to confirm, after which you will be able to
adjust the month.
20