Maintaining Snowthrower - Toro 38083 Operator's Manual

Hide thumbs Also See for 38083:
Table of Contents

Advertisement

24. Do not touch engine while it is running or soon
after it is stopped because the engine will be hot
enough to cause a burn. Do not add oil or check
oil level in crankcase when engine is running.
25. Never operate snowthrower at high transport
speeds on slippery surfaces. Use care when
backing.
26. Disengage power to the collector/impeller when
snowthrower is transported or not in use.

Maintaining Snowthrower

27. Perform only those maintenance instructions
described in this manual. Shut engine off before
performing any maintenance service or
adjustment. Additionally, pull wire off spark
plug and keep wire away from plug to prevent
accidental starting. If major repairs are ever
needed, contact your local Authorized TORO
Service Dealer for assistance.
28. Keep snowthrower in safe operating condition
by keeping nuts, bolts, and screws tight. Check
engine mounting bolts frequently to assure they
are tight.
29. Maintain or replace safety and instruction labels,
as necessary.
30. Do not overspeed the engine by changing
governor settings. Recommended maximum
engine speed is 3450 rpm. To assure safety and
accuracy, check maximum engine speed
(3450 rpm) with a tachometer.
4
31. Run the machine a few minutes after throwing
snow to prevent freeze-up of the
collector/impeller.
32. Allow engine to cool before storing in an
enclosure such as a garage or storage shed.
NEVER STORE SNOWTHROWER IN
HOUSE (LIVING AREA) OR BASEMENT
BECAUSE GASOLINE AND FUMES ARE
HIGHLY FLAMMABLE, EXPLOSIVE,
AND DANGEROUS IF INHALED. Do not
store snowthrower near any open flame or where
gasoline fumes may be ignited by a spark.
33. When storing the snowthrower for an extended
time—off season storage or 30 days—drain
gasoline from fuel tank to prevent a potential
hazard. Store gasoline in a safety–approved fuel
container. Remove key from ignition switch
when storing snowthrower. Store key in a
memorable place.
34. At the time of manufacture, the snowthrower
conformed with or exceeded OPEI safety
standards in effect for snowthrowers. Therefore,
to ensure best performance and safety, purchase
genuine TORO replacement parts and
accessories to keep the TORO all TORO.
NEVER USE "WILL FIT" REPLACEMENT
PARTS AND ACCESSORIES.
35. For safety reasons, use only those accessories
and attachments recommended by The TORO
Company to ensure continued safety certification
of the product. Using unapproved accessories
and attachments could contribute to a potential
hazard.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

824 xl power throw

Table of Contents