2
1.0
2.0
2.1
2.2
2.3
2.4
2.5
3.0
3.1
3.2
4.0
NOTE: Changes, other than editorial, are denoted by a line in the margin.
1.0 GENERAL INFORMATION
This burner and log assembly are approved for use in the GD19 gas appliance only. They are not approved for
use as a stand alone appliance or in conjunction with any other appliance.
2.0 INSTALLATION
2.1
BURNER INSTALLATION
Before installing the burner, adjust the air shutter for the
desired fuel and install the fuel conversion kit if required.
See "VENTURI ADJUSTMENT" section.
A.
Install the burner assembly ensuring that the venturi tube fi ts
over the orifi ce.
B.
Secure using the screws provided.
W415-1002 / 01.25.11
TABLE OF CONTENTS
ORIFICE
LOCATION
ASSEMBLY
SCREW
LOCATIONS
2
2
2
3
3
3
4
4
4
4
5
BURNER