Certification Testing Results Summary - ShoreTel Extreme Summit x440 Series Configuration Manual

Certification Testing Results Summary
Table 1: Test Cases for EXTREME Summit x440 Series Switches
ID Name
1.1 Switch PoE
1.2 DHCP Dynamic
configuration for IP
phones
1.3 Static configuration for IP
phones
ID Name
1.4 Sending data traffic and
voice traffic on the
same switch port
1.5 QoS
ID Name
2.1 Place call
2.2 Call waiting
2.5 Transfer – blind
2.6 Transfer – monitored
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
Description
Switch's PoE ports will successfully bring up the ShoreTel
IP phones. Power used by Phone while on or off hook is
less than Allocation power
The ShoreTel IP phones are dynamically configured by
the DHCP server. IP address and Voice VLAN ID are
assigned by the DHCP server and successfully registered
with ShoreTel Communication manager.
The ShoreTel IP phones are also statically configured
with IP addresses and Voice VLAN IDs and registered
with ShoreTel Communication manager successfully.
Description
The PCs are connected behind the ShoreTel IP phone (in
both the static and DHCP dynamically configured case).
The PCs are successfully assigned an IP address and data
VLAN ID. Sending data traffic from the PCs does not
interrupt the ongoing phone call.
The QoS function is clarified according to DSCP set on
the ShoreTel IP phones. The EXTREME
switch successfully classifies the voice traffic
and queueing/schedule accordingly.
Table 2: Test Cases for ShoreTel
Description
Verify successful call placement with normal dialing to a
variety of terminating phones.
Verify appropriate notification and successful connection
of incoming call while busy with another party.
Verify successful blind transfer of connected call.
Verify successful monitored transfer of connected call.
Results
PASS
PASS
PASS
Results
PASS
PASS
Results
PASS
PASS
PASS
PASS
- 7 -