Table of Contents
Advertisement
Operation
Monday – Friday: On 4:00 pm until 10:00 pm
Saturday – Sunday: On 6:00 am until 10:00 pm
2. Home all Day (pre-programmed) - – Has the
following preset times Monday to Sunday,
which can be altered if desired;
6:00 am until 10:00 pm
3. Holiday (pre-programmed for 13 days at 10°C
(50°F)) – Set the number of days required
(from 1 to 160) and the temperature required,
this can be as low as 7°C (45°F) and as high
as 30°C (86°F).
4. Manual - In Manual mode the heater comes
defaulted to only operate with the supplemental
element. The user then has the ability to set
the Comfort On settings, including the days,
times and set points that will allow for the
heater to release heat.
To choose a Timer Mode press Menu and rotate
the dial to select 'Timer Mode'.
Select the mode required, again by rotating and
pressing the dial. For options Work Week, Home
All Day and Manual, three choices are available -
Select, Preview and Modify.
Select - Choose this timer option.
Preview - View the times currently set.
Modify - Change the times used.
When Modify is chosen, select and change each
option by rotating and pressing the dial. When a
day is complete select Save to update it.
Once the first day has been set up it is possible to
copy these settings to successive days or all days
12
by again choosing Modify, selecting the day with
the correct settings and either choosing Copy next
or Copy all. If preferred each day can be modified
individually and saved. If is also possible to Clear
each day or Clear all days. Options are:
Save - Save times for one day.
Copy next - Copy times to following day.
Copy all - Copy times for all several days.
Clear - Reset to factory preset.
Clear all - Reset to factory for all seven
days.
!
NOTE: The unit defaults to Save. To access the
other options turn the dial.
!
NOTE: There are four time options across 4
screens.
In Holiday modes the number of days that the
room will be unoccupied for can be adjusted to-
gether with the required room temperature.
!
NOTE: Using this option could lead to high en-
ergy consumption. It is therefore recommended to
use this function only for short periods.
!
NOTE: The desired room temperature can be
selected by rotating the dial clockwise and counter
clockwise.
Boost
The Boost menu allows you to choose the mode
for the auxiliary boost element designed to come
on if the storage core runs low on energy, options
include:
No Boost – Choose this option if you never
want the auxiliary boost element to turn on.
1-4 hours – Timer can be set to enable the
heater for a specified period of time - 1 to 4
hours.
Auto Boost – Enables the auxiliary boost el-
ement to come on automatically as required
providing the highest comfort level.
www.renewables.dimplex.com
Advertisement
Table of Contents
