Vax U90-P5 Series Instruction Manual page 10

U90-P5 & U90-P6 Series User Guide v1.2.qxd:UG
vax.co.uk
5. Remove the nozzle guard by removing the four (4)
screws. Look for any obstructions and remove brushbar if
necessary (Fig.8/5).
Fig.8/5
Clearing Blockages from the TurboTool
Fig.8/6
Fig.8/7
1. Turn the TurboTool over and slide off the locking ring
(Fig.8/6).
2. Pivot lowering housing and remove clog (Fig.8/7).
10
clearing blockages
13/5/10
3. To re-assemble, be sure that the tabs are engaged. Pivot
the lower housing closed. Slip the locking ring into the
groove at the neck of the TurboTool™ to complete
reassembly (Fig.8/8).
(Some models only)
Fig.8/8
LOCKING RING
14:46 Page 10
TABS