Samsung TC222W User Manual page 42

2
Using "Windows Embedded Standard 7"
Using the Standalone restore solution

Restore the system using a restore image saved on the product.
1
After the power is connected, press the Home key immediately after the system starts during
boot to enter the boot menu.
2
Select the Recovery Mode menu and press the P key to enter "admin" which is the password.
3
Run the Recovery Mode menu by pressing the Enter key.
4
If the PROMPT "root@xxxxx:/#" appears, enter "recovery" to restore the system.
5
If PROMPT appears after a message informing that the system is successfully restored, run the
reboot command to restart the system.
Disk is configured as follows. Deleting or changing partitions may disable booting or the Standalone
restore solution.
BOOT_AGENT
Drive Letter is not defined
Data saved by the user and customized settings are deleted after a system restore.
WES7
C: Drive Letter is not defined
2 Using "Windows Embedded Standard 7"
BACKUP
42