Related Manuals for Fantasea Line Radiant 2500
Summary of Contents for Fantasea Line Radiant 2500
- Page 1 Fantasea Line Radiant 2500 Video Light (Cat. No. 6045) Instruction Manual Fantasea Radiant 2500 Video Light Instruction Manual 20150126...
-
Page 2: Table Of Contents
INSTRUCTIONS FOR USE ........................6 INSTALLING & REMOVING BATTERIES ....................6 TURNING THE RADIANT 2500 VIDEO LIGHT ON/OFF ................ 8 MOUNTING THE RADIANT 2500 VIDEO LIGHT ON AN ARM .............. 9 CARE & MAINTENANCE ........................10 FANTASEA PRODUCTS CONSUMER LIMITED WARRANTY ..............10... -
Page 3: Disclaimer
The light makes use of 6 powerful LEDs, which provide an ultra bright, even and wide output. A wide beam angle of 120 degrees makes the Radiant 2500 suitable for lighting a wide range of compositions. A 3-level adjustable power output allows you to control the intensity of the... -
Page 4: Specifications
45 x 198 mm / 1 ¾ x 7 ¾ inch (diameter x length) Weight 262g (without batteries) Included in package Instruction manual, hand lanyard, Y-S connector, 4 x 18650 batteries, dual battery charger, 2 x replacement O-rings, silicone grease and rubber sleeve Fantasea Radiant 2500 Video Light Instruction Manual 20150126... -
Page 5: Included In Package
2. Instruction Manual 7. 2 x replacement O-rings Hand lanyard 8. Silicone grease (installed on light) 9. Rubber sleeve 4. Y-S connector (installed on body of light) 5. 4 x 18650 rechargeable batteries Fantasea Radiant 2500 Video Light Instruction Manual 20150126... -
Page 6: Identification Of Video Light Parts
The Radiant 2500 Video Light should only be operated using batteries supplied by Fantasea Line, as low-cost 18650 batteries might damage the light and will void the warranty. Note that the Radiant 2500 Video Light includes 4 x 18650 batteries: 2 for installation and 2 spare ones. - Page 7 2. To open the Radiant 2500 Video Light, hold the hand grip firmly in one hand with the hand grip pointing towards your body and the LED head pointing away. Turn the LED head clockwise until it separates (image #1). Gently separate the LED head from the body of the light (image #2).
-
Page 8: Turning The Radiant 2500 Video Light On/Off
2. Take special care not to stare into the light beam or shine it into the eyes of anyone else, because the light is powerful and may damage ones’ eyes. 3. The Radiant 2500 Video Light features 4 power output modes in the following order: 100% power output, 50% power output, 25% power output and flashing mode. To switch between the power output modes, simply push the power button for half a second. -
Page 9: Mounting The Radiant 2500 Video Light On An Arm
YS Mount at the top, such as on Fantasea Flex Arms. 2. In order to install the Y-S Connector on the Radiant 2500 Video Light, first remove the screw from the bottom of the YS Mount by unscrewing it all the way out (image #5). -
Page 10: Care & Maintenance
5. Remove batteries when storing the LED light for an extended period of time. 6. The Radiant 2500 Video Light should only be operated using batteries supplied by Fantasea Line, as low-cost 18650 batteries might damage the light and will void the warranty.