Ventilation Requirements; Electrical Connection - AEG AGN58220F1 User Manual

Climate Ambient temperature
class
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature
range. If you have any
doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.

9.3 Ventilation requirements

The airflow behind the appliance must
be sufficient.
min.
5 cm
2
200 cm

9.4 Electrical Connection

CAUTION!
Any electrical work required
to install this appliance
should be carried out by a
qualified electrician or
competent person.
The wires in the mains lead are coloured
in accordance with the following code:
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and
min.
2
200 cm
2. Connect the wire coloured blue to
3. Connect the wire coloured brown to
4. Check that no cut, or stray strands of
5. Switch on the appliance.
WARNING!
This appliance must be
earthed.
The manufacturer declines
any liability should these
safety measures not be
observed.
A B
yellow to the terminal marked either
with the letter "E" or by the earth
symbol or coloured green and
yellow.
the terminal either marked with the
letter "N" or coloured black.
the terminal either marked with the
"L" or coloured red.
wire is present and the cord clamp
(E) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
ENGLISH 13
C
D
E