Usb Function - Gigabyte GA-8IPXDR User Manual

! EPP: The parallel port can be used wi t h devices that adhere to the Enhanced Parallel Port
( EPP ) specifications. EPP uses the existing parallel port signal to provide asymmetric
bi-directional data transfer driven by the host device.
! ECP: The parallel port can be used with devices that adhere to the Extended Capabilities
Port specifications. ECP uses the DMA protocol to achieve data transfer rate up to
2.5Mbit/s. ECP provides the symmetric bi-directional communication.
8 ECP Mode DMA Channel
This option is only available if the setting for the Parallel Port Mode option is "ECP"
The Choices: DMA 0, DMA 1, DMA 3 (Default)
8 Parallel Port Irq
This option is to select Parallel Port Irq
The Choices: IRQ 7(Default) , IRQ 5
CConsole Redirection Confi guration
} Console Redirection
Enable this option to remote monitoring and controlling the BIOS by the client computer.
Note: If user wants to apply this function, he/she must press ' F4' than ' DEL'
Enabled: Enables Console Redirection
Disabled: Disables Console Redirection
The Choice: Disabled (Default), Enabled
8 Serial Port Number
This option is to select serial port for console redirection. Make sure the select e d port is enabled.
The Choices: COM 1(Default) , COM 2
8 Serial Port Mode
This option is to select serial portsetting.
The Choices: [57600 8,n,1] (Default) , [115200 8,n,1] , [19200 8,n,1]
CUSB Confi guration

} USB Function

This option allows user to enable USB host controller.
37
BIOS Setup