Control Panel - Hisense RB292F4WB1 User's Operating Manual

9

Control panel

Starting up and temperature regulation
Insert the plug of the connection lead into
the plug socket with protective earth
c o n t a c t . W h e n t h e r e f r i g e r a t o r
compartment door is opened, the internal
lighting is switched on.After the fridge has
been placed in position,wait for 5 minutes
before electricity is supplied.Don't store
anything until the temperature inside the
fridge becomes low enough.
The temperature selector knob is located
on the top right of the refrigerator
compartment.
Setting "0" means
The compressor is off, but the light is still on.
Clockwise rotate the knob to turn on the
appliance.
Setting "1" means
Highest temperature, warmest setting.
Setting "7" (end-stop) means
Lowest temperature, coldest setting.
Normally we advise you select setting of 3 or
4 or 5, if you want the temperature warmer
or colder please turn the knob to lower or
higher setting accordingly.
Important! High ambient temperatures (e.g.
on hot summer days) and a cold setting
(position 6 to 7) may cause the compressor
to run continuously or even non-stop!
Reason: when the ambient temperature is
high, the compressor must run continuously
to maintain the low temperature in the
appliance
Knob
Changing the light bulb
Warning!
If the light bulb is damaged, only a
qualified electrician of competent
person must carry out it!Changing
t h e l i g h t b u l b c a r r y o u t b y
inexperienced persons may cause
injury or serious malfunctioning. it
must be replaced by a qualified
persons in order to avoid a hazard.
Contact your local Service Force
Center for help.
Light bulb data: 220-240 V,max.15W.
Unplug the mains plug
To change the light bulb, undo the screw.
Press the light bulb cover and slide
it backwards.
Change the defective light bulb.
Refit the light bulb cover and the screw.
Put the refrigerator back into operation.
Bulb
Bulb cover
Screw
Control Box