Reversing The Door - Hisense RB292F4WB1 User's Operating Manual

Reverse the door
The side at which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site requires.
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.
Tools you will need
8mm socket wrench Cross-shaped screwdriver 150x19mm monkey wrench
Thin-blade screwdriver
Before you start lay the refrigerator on its
back in order to gain access to the base,
you should rest it on soft foam packaging or
similar material to avoid damaging the
backboard of the refrigerator.
To reverse the door, the following steps are
generally recommended.
1. Stand refrigerator upright. Open upper
door, take out all door racks and water
storage box part (to avoid them damaged),
and then close door.
2. Unscrew and lift the
then remove screws used to fix top right
hinge, and remove upper hinge and screw
hole cover.
10mm wrench
upper hinge cover ,
3. Lift the upper door .Exchange the handle
and stopper according this picture. Then
place the door on a padded surface to
prevent it scratched.
NOTICE:
if the product has no handle, exchanging
handle is unnecessary.
4. Transfer the right upper hinge part to left
upper hinge part according following steps:
5.Remove the two flange screw, then remove
the middle hinge that hold the lower door in
place.
16