Table of Contents
Advertisement
Trouble-
shooting
Problem
Unit does not
turn ON
Unit has high
noise level.
Unit still does
not operate
properly.
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.
Check
• Power Cord
• Selector Switch
Check for dirty
HEPA Filter
Check all the
above points.
6
• Plug in Power Cord
• Set Selector Switch for desired blower
speed.
• Replace HEPA filter if desired.
Contact Oreck for service.
Solution
Advertisement
Table of Contents
