Proper Use Of Detergent - GEAppliances EDW1500 Series Owner's Manual

Check the Water Temperature
The entering water must be at least 120°F and not
more than 150°F, for effective cleaning and to
prevent dish damage. Check the water temperature
with a candy or meat thermometer. Turn on the
Use Jet-Dry ® Rinse Agent
Filling the Dispenser
Fill the rinse agent dispenser until it reaches the bottom
of lip inside the opening. Replace cap.
To check if rinse agent is needed, remove the cap and
look into the dispenser.
A full dispenser should last about one month.
If rinse agent spills, wipe up the excess.

Proper Use of Detergent

hot water faucet nearest the dishwasher, place
the thermometer in a glass and let the water run
continuously into the glass until the temperature
stops rising.
DO NOT USE HAND DISH DETERGENT