Dhcp Settings; Dhcp Server Configuration - satspeed V7621-A1 User Manual

Satspeed V7621-A1 User's Manual
15

DHCP Settings

You can configure your network and DSL device to use the
Dynamic Host Configuration Protocol (DHCP). This page
provides DHCP instructions for implementing it on your network
by selecting the role of DHCP protocol that this device wants to
play. There are two different DHCP roles that this device can act
as: DHCP Serve and DHCP Relay. When acting as DHCP
server, you can setup the server parameters at the DHCP
Server page; while acting as DHCP Relay, you can setup the
relay at the DHCP Relay page.

DHCP Server Configuration

316. From the left-hand Services menu, click on DHCP.
317. From DHCP Mode check ratio, click on DHCP Server.
318. Type a new IP Pool Range, Subnet Mask, Max Lease
Time, Domain Name and Gateway Address.
319. Click on Apply Changes.
Configuring your Computers
150