Amplicomms NL 200 Operating Instructions Manual page 13

Charging the battery
1. Connect the power adapter plug to the
connection socket (7).
2. When the NL200 is charging, the Status
LED (3) lights up red.
3. When the NL200 is fully charged, the
Status LED (3) does not light up.
The charging time is 5 hours.
Only use the power adapter
plug supplied labelled with
output data 5 V
Low battery charge
When the battery charge in the NL200 be-
comes low, an acoustic alert signal is issued
during the call.
0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge
Operating elements
, 200 mA.
DC
and then 5p a minute. Mobile costs may vary.
1 2 3
4
1 Induction loop
2 Microphone
3 Status LED
4 Power button
5 Volume Up key
6 Volume Down key
7 Power adapter socket
Starting Up
7
5 6
13