User Controls; Control Panel & Remote Control - Optoma RMC-25key User Manual

User Controls

Using the Control Panel
ON/STANDBY
Power LED
Lamp LED
Temp LED
Menu
Source
Four Directional
Select Keys
Keystone
Re-Sync
Enter
8
English
Control Panel & Remote Control
There are two ways for you to control the functions:
Control Panel and Remote Control.
Refer to the "Power On/Off the Projector" section
on pages 14-15.
Indicate the projector's status.
Indicate the projector's lamp status.
Indicate the projector's temperature status.
Press "Menu" to launch the on-screen display
(OSD) menu. To exit OSD, Press "Menu" again.
Press "Source" to select an input signal.
Use
adjustments to your selection.
Use
caused by tilting the projector.
Automatically synchronize the projector to the
input source.
Confi rm your item selection.
to select items or make
to adjust image distortion