Grandstream Networks GXP2140 Quick Installation Manual page 6

Enterprise ip phone

Hide thumbs Also See for GXP2140:

Table of Contents

Available languages

Enlarged version

GXP2140 EXTENSION MODULE --

GXP2200EXT:

GXP2200EXT is an ideal solution for the busy enterprise environment looking to

add the ability to receive and dispatch calls efficiently. Each extension module has

20 programmable buttons, Left and Right buttons, supporting 40 Multiple Purpose

Keys to be configured. GXP2140 supports up to 4 extension modules, adding 160

fully programmable phone extensions to the phone.

Note: GXP2200EXT is an additional accessory for the GXP2140 and is not in-

cluded in the GXP2140 box.

GXP2200EXT Package Content:

1 X GXP2200EXT Stand

1 X GXP2200EXT Board

1 X GXP2200EXT

Connector Plate

1 X RJ11-RJ11 Cable

4 X Screws

Installing GXP2200EXT:

1. On the back of GXP2140 and GXP2200EXT there are slots for the connec-

tor plate. Attach the connector plate between the slots for GXP2140 and GX-

P2200EXT;

2. Apply the screws provided and securely tighten them in (see Figure in this

page);

3. Connect GXP2200EXT Board to GXP2140 via the EXT port using the RJ11-

RJ11 cable provided;

4. Install the phone stand on GXP2140 and GXP2200EXT;

5. Power up the GXP2140. The GXP2200EXT will show the booting up screen

with version information and connecting status;

6. After successfully booting up, GXP2200EXT will stay in idle. Press and hold the

Left button for 3 seconds to check the version information and status.

Table of Contents