Opening The Power-Supply Cage - IBM System x3400 M3 Types 7378 Installation And User Manual

Opening the power-supply cage

Opening the power-supply cage allows access to the air baffle, microprocessors,
and DIMMs. To open the power-supply cage, complete the following steps:
1. Read the safety information that begins on page vii, and "Handling
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Press the release latch on the power supplies and pull them out of the
4. Unlock and remove the left-side cover (see "Removing the left-side cover" on
5. Pull up on the power-supply cage handle to unlock the cage; then, rotate the
6. Let the power-supply cage rest on the rear power-supply latch bracket.
static-sensitive devices" on page 31.
all external cables.
power-supply cage.
Hot-swap
power supply
Release
latch
page 49 for more information).
cage out until it stops. The tab on the rear power-supply latch bracket clicks into
place when the cage is completely out of the way.
Chapter 2. Installing optional devices
55