Introduction; Monitors; Unpacking; Accessories (Not Included) - Bosch LTC 2813/90 Instruction Manual

LTC 2813/90 | Instruction Manual | Introduction
1

INTRODUCTION

1.1

Monitors

The LTC 2813/90 (36 cm/14-inch) monitor is
intended for the display of PAL or NTSC standard
color pictures in CCTV systems, and has a power
input range of 90 VAC to 264 VAC. The monitor
accepts two (2) Composite Video inputs with loop-
through BNC connectors, located on the rear of the
monitor.
For applications that require audio, two (2) audio
phono jack connectors (In & Out) are provided on
the rear panel.
2

UNPACKING

Read these instructions carefully.
This electronic equipment should be unpacked and
handled carefully. Check for the following items:
• LTC 2813/90 Color Video Monitor
• Two (2) Power Cords: One (1) 120 VAC, 60 Hz
mains power; one (1) 230 VAC, 50 Hz mains
power.
• Installation Instructions (this manual)
2.1 Accessories
LTC 9113/00 Rack Kit: For mounting one
LTC 2813/90 monitor in an EIA 19-inch rack.
Bosch Security Systems | 06 August 2003
(Not Included)
3

SERVICE

If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems Inc.
Service Center for authorization to return and shipping
instructions.

Service Centers

U.S.A.: Phone: 800-366-2283 or 408-956-3895
fax: 800-366-1329 or 408-956-3896
e-mail: NationalServiceCenter@ca.slr.com
Canada: 514-738-2434
Europe, Middle East & Asia Pacific Region:
32-1-440-0711
For additional information, see
www.boschsecuritysystems.com.
EN | 9