Table of Contents
Advertisement
LTC 2910/90 | Instruction Manual | Introduction
1
INTRODUCTION
1.1
Monitors
The LTC 2910/90 (23 cm/9-inch) monitor is
intended for the display of PAL or NTSC standard
color pictures in CCTV systems, and has a power
input range of 90 VAC to 264 VAC. The monitor
accepts two (2) Composite Video inputs with loop-
through BNC connectors, located on the rear of the
monitor.
For applications that require audio, two (2) audio
phono jack connectors (In & Out) are provided on
the rear panel.
2
UNPACKING
This electronic equipment should be unpacked and
handled carefully. Ensure that the following items are
included:
•
LTC 2910/90 Color Video Monitor
•
Two (2) Power Cords: One (1) for 120 VAC, 60 Hz
mains power; one (1) for 230 VAC, 50 Hz mains
power.
•
Installation Instructions (this manual)
2.1
Accessories (Not Included)
TC210AMK Rack Kit: For mounting one or two
LTC 2910/90 monitor(s) in an EIA 19-inch rack. A
blanking panel is provided to cover the unused
opening when only one unit is rack mounted.
Bosch Security Systems | April 2, 2007
3
SERVICE
If the unit requires service, contact the nearest Bosch
Security Systems Service Center for authorization to
return the unit and for shipping instructions.
Service Centers
USA
Phone:
800-366-2283 / 585-340-4162
fax:
800-366-1329
e-mail:
cctv.repair@us.bosch.com
CCTV Spare Parts
Phone:
800-894-5215 / 408-957-3065
fax:
408-935-5938
e-mail:
BoschCCTVparts@ca.slr.com
Canada
Phone:
514-738-2434
fax:
514-738-8480
Europe, Middle East & Asia Pacific Region
Phone:
44 (0) 1495 274558
fax:
44 (0) 1495 274280
email:
rmahelpdesk@solectron.com
For additional information, see
www.boschsecurity.com.
EN | 9
Advertisement
Table of Contents
