Related Manuals for Aztech ASF40D
Summary of Contents for Aztech ASF40D
- Page 1 ASF40D Aztech 16” Stand Fan USER MANUAL PLEASE REtAiN thiS USER MANUAL FoR FUtURE USE.
-
Page 2: Safety Instructions
• Should damages be found in the appliance, please do not use the appliance and immediately bring it to the Aztech Service Center for repair or replacement. •... -
Page 3: Package Contents
PACKAGE CONTENTS PACKAGE CONTENTS Fan Base Front Grill Main Body Fan Blade Fan Stand User Manual Warranty Policy Rear Grill Easy Start Guide APPLIANCE OVERVIEW FAN CoMPoNENtS Motor/ Head Front Grill Display Grill Ring Control Blade Column Height Blade Adj u stment Grill Ring Rear... - Page 4 FAN BUttoNS AND LED DiSPLAY LED DiSPLAYS tiMER SEttiNGS. Displays the currently • selected operation time (0.5, 1H, H, and H) upon pressing the TIMER button. SPEED iNDiCAtoR. Displays the currently • selected fan speed (1 for Low, for Medium, and for High).
-
Page 5: Remote Control
REMotE CoNtRoL oN/SPEED • Press this button to turn ON » your Stand Fan If your Stand Fan is ON, » pressing this button repeatedly will allow you to shift between HIGH / MEDIUM / LOW Speeds. MoDE. Press this button •... -
Page 6: Assembling The Stand
STAND FAN ASSEMBLY tiPS BEFoRE ASSEMBLiNG YoUR StAND FAN • Ensure to unpack your stand fan and its components. • Remove the Fan Blade Cap and the Grill Nut from the motor shaft. • Remove the Fan Stand Nut from the Fan Stand. ASSEMBLiNG thE StAND Attach the Fan Stand to the Fan Base. -
Page 7: Assembling The Fan
ASSEMBLiNG thE FAN On the Fan Motor, position the Rear Grill with the Fan Handle facing up. Ensure that the Rear Grill is stably positioned into the PoSitioNED iNto FAN grooves of the Fan Motor. MotoR’S GRooVES Using the Grill Nut, fasten the Rear tiGhtEN thE Grill by turning it clockwise until GRiLL NUt to... - Page 8 • Should damages be found in the appliance, please do not use the appliance and immediately bring it to the Aztech Service Center for repair or replacement. StEP 1 Correctly assemble your Stand Fan as ASSEMBLE AS seen on the Stand Fan Assembly section.
-
Page 9: Other Instructions
OTHER INSTRUCTIONS ADJUStiNG thE FAN’S hEiGht StEP 1 SUPPoRt thE FAN hEAD Hold the Fan Handle to support the fan’s head. StEP 2 ADJUSt thE hEiGht Using your other hand, loosen the ADJUStMENt Height Adjustment Ring. RiNG StEP 3 ADJUSt hEiGht AND Slowly lower or raise the Main Body tiGhtEN thE hEiGht until the desired height is achieved... - Page 10 KNoWiNG AND ChANGiNG thE MoDES BLoWiNG MoDES Your Stand Fan has three () Blowing Modes for you to choose from. Each mode would either use a constant speed setting (e.g. Low while ON), or is pre- programmed with interval-based speed changing (e.g.
-
Page 11: Care And Maintenance
CARE AND MAINTENANCE tiPS BEFoRE CLEANiNG / MAiNtENANCE • Your Aztech Stand Fan is not intended for people with reduced physical, sensory or mental capabilities, and/or lack of experience or knowledge. Constant supervision (from a person responsible for their safety) should be provided if such individuals would be using, cleaning, or operating, the appliance. - Page 12 Copyright © 015 Aztech Technologies Pte Ltd (CRN:10065M ). All rights reserved.
Need help?
Do you have a question about the ASF40D and is the answer not in the manual?
Questions and answers