Advertisement
Chapter 4: How to Connect the LevelOne HomePlug Ethernet Bridge
Note: Please make sure the driver installation is finished.
1. Insert the Ethernet cable connector into the PC's Ethernet port or DSL/Cable/Wireless Router Ethernet
port.
2. Insert the Ethernet cable another connector into the Ethernet port on the HomePlug Ethernet Bridge.
3. Insert the Power cord's connector into the HomePlug Ethernet Bridge and plug the power cord into the
outlet.
Chapter 5: Introduction to the LevelOne Configuration Utility
To Access the LevelOne Configuration Utility
The short-cut icon is automatically created on your desktop. You may double click the icon to access the
LevelOne configuration utility.
You may see four categories including Main, Privacy, Diagnostics and About.
1. Main: View current status of all devices which have same name of network and connect to the HomePlug
network by Ethernet.
10
Advertisement
