It is recommended that you should create an appropriate copy or backup of all the im- portant settings that are stored in the memory of the device. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
MUST NOT be mixed with other commercial waste for disposal. Check the terms and condi- tions of your supplier for disposal information. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
R-SeeNet. Industrial XR5i v2E router is enhanced by the ability to create custom functions easy integration of custom software modules. Examples of possible applications security system monitoring vending and dispatcher machines LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Figure 1: Contents of package Temperature range for power supply is reduced to 0 C to +40 C! LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
For correct function of the router we recommend to use in the switch-board earth-bonding distribution frame for grounding of power supply of router, data cables and antenna. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Circuit example: Figure 17: Connection of power supply The positive pole VCC is marked by a red socket on the power. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
ATTENTION! ETH port is not POE (Power Over Ethernet) compatible! Plug Ethernet cable into the RJ45 connector labeled as ETH (see figure below). Figure 19: Connection of ethernet cable LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Before putting the router into operation it is necessary to connect all components which are required to run your applications. The router can not operate without connected power supply. Figure 21: Router connection LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Figure 22: Entering the IP address of the router Configuration may be performed only by the user "root" with default password "root". Figure 23: Entering login information LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
A detailed description of the router settings via the Telnet can be found in the document Con- figuration manual for v2 routers. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
NAT or firewall. Verify NAT using ping to the static server address. Verify Firewall accessing remotely to the router’s Web interface. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Page 28
SMS messages do not change the router configuration. They remain in effect only until the router is restarted. FTP doesn’t function. Router doesn’t support active FTP mode. It supports passive mode only. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Declaration of Conformity was issued and it is possible to find it on the Conel website (http://www.conel.com/download) or at producer. Please, use the following login information: Username – ConelFreeDownload, Password – coneldownload. LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de...
Need help?
Do you have a question about the XR5i and is the answer not in the manual?
Questions and answers