Homelite UT80432 Operator's Manual page 20

Hide thumbs Also See for UT80432:
Table of Contents

Advertisement

Available languages

Available languages

PERIODIC MAINTENANCE SCHEDULE
NOTE: If a separate engine manual is provided for this pressure washer, please follow the maintenance schedule provided
in the engine manual instead of the maintenance information listed below.
Maintenance Items
Check for water leaks under manifold, into crankcase
Plumbing
Clean engine and check nuts and bolts
Check and refill engine lubricant
Change engine lubricant (initial change)
Check water inlet filter placement
Add fuel stabilizer
Add pump protector
Change engine lubricant
Check spark plug
Clean air filter
Replace air filter element
Clean and adjust spark plug and electrodes
Replace spark plug
Initial lubricant change should be performed after first 20 hours of operation. Thereafter, change lubricant every 100 hours.
1
If water inlet filter is missing or damaged, it must be replaced. See Replacement Parts List for part number to order.
2
NOTE: If you are not sure how to perform any of the maintenance items listed above, take the unit to an authorized
service center to have the maintenance item performed.
MAINTENANCE
Each use
1
2
Page 16 — English
Weekly
25 hrs
50 hrs
200 hrs

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents